Product Information

Description For Acrylic/Gelcoat/Mineral Cast

Application Cleaning and polishing compound to gently remove limescale and discoloration, dirt deposits and minor scratches. Ideal for the Intensive cleaning

Surfaces Acrylic, polyester, mineral cast fiberglass gelcoat surfaces

Benefits Gently cleans surfaces

Gentle on hands

Concentrated cleaning compound

Pleasant scent

How to Use Apply the amount of a hazel nut on damp cloth or sponge and rinse off with warm water. Polish the cleaned surface to a high gloss with the intensive cleaner and a soft wet cotton cloth until the desired shine is achieved.

Advise Test on an inconspicuous area first

Storage At +5^o to 30^o C, Minimum Durability 5 years

FAQ’s

What else can be cleaned with Acryl Mineral?

Good results will also be achieved on stainless steel and natural stones. Please refer to the recommendations given by the manufacturer and first try for compatibility in an inconspicuous place.

Use and Warnings

Unsuitable cleaners or abrasive detergents can harm the brilliant shine of acrylic and mineral cast – the surface will get dull and matt. With the combination of selected surfactants and a polishing compound Acryl-Star removes discolorations, heavy stains and limescale deposits and at the same time polishes the surface. On acrylic surfaces deeper scratches can be sanded down with the attached sandpaper before polishing the surface with the paste and thus returning it to a high shine. INSTRUCTION: Apply a hazelnut-size amount of Acryl-Star with a moist sponge on the wet surface, rub in gently, rinse off with warm water and rub dry. Deeper scratches must first be sanded with the included 1200 grade wet/dry sandpaper and water. Sand in straight direction (not circles) parallel to the scratches. Then use the 2500 wet/dry sandpaper again with water. But now change the direction by 90° and sand the whole area until you get a smooth, matt surface. For scratches on mineral cast please only use the polishing paste. The enclosed sandpapers are not suitable for this material due to the thin colouring layer! For polishing apply Acryl-Star on the clean surface and polish with a soft, wet cotton cloth for 3-5 minutes until the desired shine is achieved. 648/2004/EG, contains: less than 5% anionic surfactants, non-ionic surfactants, soap. Further ingredients: polishing powder, fragrances, preservatives O-PHENYLPHENOL

List of Ingredients

Polishing powder

AQUA

SOAP

SODIUM C14-C17 SECALKYL SILFONATE

Silicon dioxide

Isotridecanol, ethoxyliert

Potassium carbonate

PROPYLENE GLYCOL

HEXYL CINNAMAL, LIMONENE

O-PHENYLPHENOL